Choose by Material & Machine
| Tool range | Available profiles | Coating | Machine reference |
|---|---|---|---|
| Zirconia | Ø0.6 / 1.0 / 2.0 mm round; Ø1.2 mm flat-end | Diamond-coated cutting section | Selected vhf E4, E5, K5, K5+, S5 and R5 setups |
| PMMA & Wax | Ø0.6 / 1.0 / 2.0 mm round | Uncoated cutting section | Selected vhf E4, E5, K5, K5+, S5 and R5 setups |
Machine models are references only. Confirm that your machine setup accepts a 3 mm shank and 40 mm overall tool length, then compare the stop-ring position and CAM tool profile with your current bur.
E4/E5 roughing programs that specify an AIRTOOL require a dedicated AIRTOOL; the standard burs on this page do not replace it.

